DIR-806A Wireless AC750 Multi-Function Router
User Manual
Configuring Device (Router Mode)
Figure 51. Configuring PPTP + Dynamic IP WAN connection. The expert settings mode. The Miscellaneous
section.
Parameter Description
Miscellaneous
Enable RIP
Select the checkbox to allow using RIP for this connection.
NAT
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Firewall
Select the checkbox to enable protection against ARP and DDoS
attacks.
Ping
Select the checkbox to allow the router to answer ping requests from
the external network through this connection. For security reasons,
it is recommended not to select this checkbox.
Click the Next button to continue.
After that the page displaying all specified settings opens. Click the Apply button to create the
connection or the Back button to specify other settings.
After clicking the Apply button, the page for checking the Internet availability opens (see the
Checking Internet Availability section, page 74).
Page 73 of 233
To Next Page
Loading...
