DIR-806A Wireless AC750 Multi-Function Router
User Manual
Configuring Device (Router Mode)
On the next page, you need to enter the password for connection to the network.
Figure 57. Entering the password for connection to the wireless network.
Enter the password in the Network key field. If you don't need a password to connect to the
selected network, the Network key field is unavailable.
Click the Next button.
On the next page, the parameters of the network to which you want to connect and the entered
password are displayed. Make sure that the specified settings are correct and then click the Apply
button. After that, the wireless channel of DIR-806A will switch to the channel of the wireless
access point to which you have connected.
After configuring the device as a client, you need to create a WAN connection with relevant
parameters for the WiFiClient port.
After clicking the Apply button, the page for configuring the router to use an IPTV set-top box
opens (see the Configuring IPTV section, page 80).
Page 79 of 233
To Next Page
Loading...
