DIR-806A Wireless AC750 Multi-Function Router
User Manual
Configuring Device (Router Mode)
Parameter Description
Private port (begin)/
Private port (end)
A port of the IP address specified in the Private IP field to which
traffic is directed from the Public port. Specify the start and the
end value for the port range. If you need to specify one port, enter
the needed value in the Private port (begin) field and leave the
Private port (end) field blank.
Private IP
Enter the IP address of the server from the local area network. To
choose a device connected to the router's LAN at the moment, select
the relevant value from the drop-down list (the field will be filled in
automatically).
Remote IP
Enter the IP address of the server from the external network.
When needed settings are configured, click the Apply button. After successful creation of the
virtual server a notification appears. Click the OK button in the notification window, and then click
the Back icon ( ) on the left side of the page to get back to the quick settings page.
Page 87 of 233
To Next Page
Loading...
