D-Link DPR-1260 - RangeBooster G Multifunction Print Server User Manual

5D-Link DPR-1260 User Manual
Section 1 - Product Overview
Introduction
D-Link’s new Rangebooster G
™
Multi-Function Print Server (DPR-1260) allows you to wirelessly share up to 4 USB
Multi-Function Printers (MFP) on your network. This innovative new print server allows multiple users to Print or Scan
using one of the four connected MFP printers. By supporting multiple MFP Printers over a wireless connection, this
new print server is the ideal solution for your home, the classroom, or office.
Simply plug your USB printer into one of the four ports, run the automatic configuration wizard, and you are ready to
start printing and scanning over your wireless network. For extra network connectivity, you can also use the Ethernet
port on the DPR-1260 to provide wireless connectivity to any Ethernet-enabled device, such as a computer or Network-
Attached Storage (NAS)
* Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput
rate. Environmental conditions will adversely affect wireless signal range.

D-Link DPR-1260 - RangeBooster G Multifunction Print Server Specifications

General

Brand	D-Link
Model	DPR-1260 - RangeBooster G Multifunction Print Server
Category	Print Server
Language	English