Using the Web Configurator
D-Link DPR-2000 - User Manual 63
This screen section contains the fields detailing your noti
Print Server E-mail Address: This is the address w
fication e-mail account.
here you wish to receive
is full, a message will be generated by the network
administrator and sent to this Print Server email address.
Incoming E-mail (POP3) Server Address: This is the address of the server
through which your Print Server can receive e-mail (i.e. the server address of
the Print Server E-mail Address that you specified above).
Outgoing E-mail (SMTP) Server Address: This is the address of the server
through which your Print Server can send an e-mail.
E-mail Account (POP3) Name: This is the name of the sever where your Print
Server E-mail Address is located.
) Password: This is password to your Print Server
t Server. To abort and exit, click Cancel.
E cally
pr printer connected to USB Port 1. To enable this function, do as
s) in the Check E-mail Interval field.
3. Click Apply Settings to enable this function, then re-boot the Print Server. To
ancel.
e-mail from the network administrator. An example of this usage is when the
mail box of the e-mail address that you specified in the Enable E-mail
Notification section above
E-mail Account (POP3
E-mail Address
Click Apply Settings after you have filled in all of the fields above to save, then
re-boot the Prin
E-mail Printing
-mail containing ASCII text that your Print Server receives can be automati
inted out from the
follows:
1. Click the Enable button next to E-mail Printing (ASCII Text Only).
2. Type in an time interval (in minute
abort and exit, click C
To Next Page
Loading...
Need help?
General
