DSL-2600U ADSL/Ethernet Router with Wi-Fi
User Manual
Configuring via Web-based Interface
System
In this menu you can do the following:
• change the password used to access the router's settings
• save the current settings to the non-volatile memory
• create a backup of the router's configuration
• restore the router's configuration from a previously saved file
• restore the factory default settings
• view the system log
• update the firmware of the router
• configure automatic synchronization of the system time.
Administrator Password
On the System / Administrator password page, you can change the password for the
administrator account used to access the web-based interface of the router and to access the device
via TELNET
!
For security reasons, it is strongly recommended to change the administrator password
upon initial configuration of the router.
Figure 98. The System / Administrator password page.
Enter the new password in the Password and Confirmation fields and click the Save button.
Page 104 of 112
To Next Page
Loading...
Need help?
Power
Data Transfer Rates
