DSL-2600U ADSL/Ethernet Router with Wi-Fi
User Manual
Configuring via Web-based Interface
Additional Settings
On the Wi-Fi / Additional settings page, you can define additional parameters for the router's
WLAN.
!
Changing parameters presented on this page may negatively affect your WLAN!
Figure 71. Additional settings of the WLAN.
The following fields are available on the page:
Parameter Description
Beacon Period
The time interval (in milliseconds) between packets sent to
synchronize the wireless network.
RTS Threshold
The minimum size (in bites) of a packet for which an RTS frame is
transmitted.
Frag Threshold
The maximum size (in bites) of a non-fragmented packet. Larger
packets are fragmented (divided).
DTIM Period
The time period (in seconds) between sending a DTIM (a message
notifying on broadcast or multicast transmission) and data
transmission.
TX Power
The router's transmit power (in percentage terms).
Bandwidth
Channel bandwidth for 802.11n devices. DSL-2600U supports
20MHz channels only.
TX Preamble
This parameter defines the length of the CRC block sent by the
router when communicating to wireless devices.
Select a value from the drop-down list.
Long Preamble.
Short Preamble (this value is recommended for networks with
high-volume traffic).
When you have configured the parameters, click the Change button.
Page 80 of 112
To Next Page
Loading...
