DSL-2600U ADSL/Ethernet Router with Wi-Fi
User Manual
Configuring via Web-based Interface
Configuration
On the System / Configuration page, you can save the changed settings to the non-volatile
memory, restore the factory defaults, backup the current configuration, or restore the router's
configuration from a previously created file.
Figure 99. The System / Configuration page.
The following buttons are available on the page:
Control Description
Save
Click the button to save settings to the non-volatile memory. Please,
save settings every time you change the router's parameters.
Otherwise the changes will be lost upon reboot of the router.
Factory
Click the button to restore the factory default settings. Also you can
restore the factory defaults via the hardware RESET button (see the
Saving and Restoring Settings section, page 30).
Backup
Click the button and follow the dialog box appeared to save the
configuration (all settings of the router) to your PC.
Restore
Click the button to upload a previously saved configuration (all
settings of the router) from a file on your PC. Click the
Choose/Browse
3
button to select a previously saved configuration
file located on your PC.
Actions of the Save, Factory, and Backup buttons also can be performed via the top-page menu
displayed when the mouse pointer is over the System caption.
3 The name of the button depends upon the web browser that you use.
Page 105 of 112
To Next Page
Loading...
Need help?
Power
Data Transfer Rates
