DSL-2600U ADSL/Ethernet Router with Wi-Fi
User Manual
Configuring via Web-based Interface
Site Setup Wizard
To create a virtual server for redirecting incoming Internet traffic to a specified IP address in the
LAN, click the Host site button.
Figure 40. The page for adding a virtual server.
On the opened page, you can specify the following parameters:
Parameter Description
Name
Enter a name for the virtual server for easier identification. You can
specify any name.
Interface
Select a WAN connection to which this virtual server will be
assigned.
Private IP
Enter the IP address of the server from the local area network. To
choose a device connected to the router's LAN at the moment, select
the relevant value from the drop-down list located to the right of the
Private IP field (the field will be filled in automatically).
Remote IP
Enter the IP address of the server from the external network.
When needed settings are configured, click the Save button. After that you get to the quick settings
page.
Page 44 of 112
To Next Page
Loading...
Need help?
Power
Data Transfer Rates
