D-Link DSL-4320L User Manual

118D-Link DSL-4320L User Manual
Section 4 - Conguration
If you want to allow router setup via the SSH, telnet, or TFTP protocols,
you can congure it here.
For each protocol, click Enable Local Management to allow
administrators to congure the network from within, and/or Enable
Remote Management to allow administrators to congure the
network from outside.
If you enabled remote management, enter the remote port number
that the router will use for that protocol.
Click Save when you are done.
SSH / Telnet /
TFTP:
To load, save, or reset settings, or reboot the router, click Save.

D-Link DSL-4320L Specifications

Device Interfaces

USB Port Power	5 V / 0.9 A
802.11 ac/n/g/b/a wireless LAN	5 V / 0.9 A

Operating Environment

Operating Temperature	0 to 40 °C (32 to 104 °F)
Operating Humidity	10% to 95% maximum (non-condensing)

Power

Input Voltage	100 to 240 V AC, 50/60 Hz
Output Voltage	12 V DC
Output Current	5 A

Weight and Dimensions

weight	925.08 g (2.04 lbs)
dimension 1	225.20 mm (8.87 inches)
dimension 2	342.70 mm (13.49 inches)
dimension 3	100.88 mm (3.97 inches)