D-Link DSL-4320L User Manual

119D-Link DSL-4320L User Manual
Section 4 - Conguration
System
This option will save the current router conguration settings to a le
on your computer.
This option will load a previously saved router conguration le. This
will overwrite the router’s current conguration.
This option will restore all conguration settings back to the settings that
were in eect at the time the router was shipped from the factory. Any
settings that have not been saved will be lost, including any rules that
you have created. If you want to save the current router conguration
settings, use the Save Settings To Local Hard Drive button above.
You may congure the router to automatically reboot at a set time.
Please note, the router will be temporarily unavailable while rebooting.
Click to reboot the router immediately.
You may select Never, Daily, or Weekly.
Choose the day of the week to automatically reboot the router.
Choose the time of day to automatically reboot the router.
Click Save when you are done.
Save Settings
To Local Hard
Drive:
Load Settings
From Local
Hard Drive:
Restore To
Factory Default
Settings:
Auto Reboot
Conguration
Reboot The
Device:
Auto Reboot:
Day of the
week:
Time:
This page allows you to save the router’s current conguration, load a previously saved
conguration, reset the router to its factory default settings, or reboot the router.
From the Admin page, click System. To return to the Admin page, click Admin.

D-Link DSL-4320L Specifications

Device Interfaces

USB Port Power	5 V / 0.9 A
802.11 ac/n/g/b/a wireless LAN	5 V / 0.9 A

Operating Environment

Operating Temperature	0 to 40 °C (32 to 104 °F)
Operating Humidity	10% to 95% maximum (non-condensing)

Power

Input Voltage	100 to 240 V AC, 50/60 Hz
Output Voltage	12 V DC
Output Current	5 A

Weight and Dimensions

weight	925.08 g (2.04 lbs)
dimension 1	225.20 mm (8.87 inches)
dimension 2	342.70 mm (13.49 inches)
dimension 3	100.88 mm (3.97 inches)