D-Link DSL-X3052E - Page 16

12D-Link DSL-X3052E User Manual
Section 2 - Installation
3-1
Use the DSL-X3052E as both a modem and router. Plug one end of the supplied DSL phone cable into the DSL
port on the back of the router and the other end into the telephone wall jack with the supplied microlter installed in
between.
Use the DSL-X3052E as a router only. Plug one end of the supplied Ethernet cable into the WAN port on the back
of the router and the other end to your existing cable/UFB/NBN™ connection box or modem. Then power on the
connection box.
3-2
a. Connect the supplied microlter to your telephone wall jack with the
cable labelled WALL SOCKET.
b. Connect the supplied phone cable from the MODEM port on the
microlter to the DSL port of the router.
WALL JACK
WALL JACK
nbn™ connection box
PC