15D-Link DSL-X3052E User Manual
Section 3 - Getting Started
Setup Wizard
If this is your rst time using the router, open your web browser and enter the
IP address of the router (default: http://192.168.1.1). The default password for
admin is printed on the bottom of the device.
The wizard is designed to guide you through a step-by-step process to
congure your new D-Link router and connect to the Internet. Depending on
your Internet service and network environment, ensure that your DSL port is
connected to the wall jack or an Ethernet WAN port is connected to an active
Internet connection.
Click Next to continue.
WAN Access Type would attempt to auto detect your connection type as either
VDSL, ADSL or Ethernet.
Enter VPI (Virtual Path Indicator)and VCI (Virtual Channel Indicator) for ADSL.
Enter a Vlan ID for VDSL and Ethernet.
Click Next to continue.
192.168.1.1
To Next Page
Loading...
