D-Link DSL-X3052E - Page 40

36D-Link DSL-X3052E User Manual
Section 4 - Conguration
IPv6 Settings
IPv6 Message
Fetch Type:
This displays the IP assignment method.
DHCP IPv6 Enable: Select the IPv6 auto-conguration type: SLAAC or DHCP. If DHCP is
selected, enter the default gateway or leave it blank for automatic
conguration.
PD Enable Enable or disable prex delegation. Also select the prex mode:
Auto or Manual. For Manual, please enter the prefix address
with 16-bit hexadecimal values separated by colons, for example
2001:b011:2000:0012::. Enter the prefix information option by
specifying preferred lifetime and valid lifetime for the prex (600-
4294967295 seconds). Note that preferred lifetime must be less than
or equal to valid lifetime.
Click Save when you are done.