D-Link DWR-2101 User Manual
Configure Your 2.4 GHz Wi-Fi Settings
Press the power button to wake up your screen.
Slide your finger across the indicator to unlock your screen. If you've set a password to unlock your device, you'll need to enter it to proceed.
Swipe your display to navigate to Settings on your homescreen.
Tap Settings.
Tap WiFi 2.4 G.
To enable the 2.4 GHz Wi-Fi, tap WiFi Enable. The SSID for the 2.4 GHz Wi-Fi will now show up for your devices as a network to connect to.
The Bandwidth menu allows you to change the channel width being used by your DWR-2101. A wider megahertz channel may increase
performance, but could cause interference with other Wi-Fi devices. To change the bandwidth to use for your wireless network:
a. Tap Bandwidth.
b. Choose between 20 MHz or 20/40 MHz bandwidth.
c. Tap to save.
To hide your SSID from Wi-Fi search results, tap Hide SSID.
To Next Page
Loading...
