D-Link DWR-2101 - LAN Settings; Changing Your LAN Settings

Section 29 – LAN Settings
D-Link DWR-2101 User Manual
59
LAN Settings
This page provides configuration options for local area network (LAN) settings. A DHCP server assigns an IP address to every device on your
network automatically, ensuring that every device gets a unique IP Address to connect to the network.
Changing your LAN Settings
Open a web browser and enter 192.168.0.1 in the address bar to access the DWR-2101's web-based user interface.
Enter in your username and password, then click Login.
Navigate to LAN Settings from the menu bar.
Configure the fields as per below:
a. LAN Gateway IP: The device's current IP address.
b. LAN Subnet Mask: The subnet number that your device is using.
c. LAN DHCP: Enable or disable the DHCP server.
d. LAN DHCP Start IP: Alter the LAN DHCP's start IP.
e. LAN DHCP End IP: Alter the LAN DHCP's end IP.
f. LAN DHCP Lease Time: Enter in the amount of time in seconds a network device can use an IP address in the network. The IP address will be
reserved for the device until the lease time expires.
Click Update to save your settings.