D-Link DWR-2101 - WPS Settings; Enabling WPS; Connecting Devices via WPS

Section 23 – WPS Settings
D-Link DWR-2101 User Manual
50
WPS Settings
The WPS Settings page allows you to configure and enable the WPS settings for the device.
Enabling WPS
Open a web browser and enter 192.168.0.1 in the address bar to access the DWR-2101's web-based user interface.
Enter in your username and password, then click Login.
Navigate to WPS Settings from the menu bar.
Click the toggle to enable WPS.
Connecting Devices via WPS
Open a web browser and enter 192.168.0.1 in the address bar to access the DWR-2101's web-based user interface.
Enter in your username and password, then click Login.
Navigate to WPS Settings from the menu bar.
Click Via the WPS button.
Click WPS to start a WPS connection.