D-Link DWR-2101 - Page 73

Section 36 – Networking Basics
D-Link DWR-2101 User Manual
68
Step 4
Click
Use the following IP address and enter an IP address that is on the same subnet as your
network
or the LAN IP address on your router.
Example:
If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where
X is a
number between 2 and 99. Make sure that the number you choose is not in use on the
network. Set
Default Gateway the same as the LAN IP address of your router (192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary
DNS is not
needed or you may enter a DNS server from your ISP.
Step 5
Click
OK twice to save your settings.