215
C
L3 Roaming Example
L3 Roaming can be achieved by using VLAN trunking (associate the SSID with a VLAN) or
by using an L3 Tunnel (associate the SSID with a tunnel subnet). The example in this
appendix describes how to configure a D-Link Unified Switch by using an L3 Tunnel for a
network that needs L3 roaming capabilities.
This example contains information about the following features, which might be required to
use L3 tunneling on your WLAN:
• Configuring the WLAN and Tunnel Interfaces
• Configuring the L3 Tunnel Network
• Configuring DHCP Relay and the DHCP Server
To Next Page
Loading...
