DXS-3326GSR Stackable Gigabit Layer 3 Switch
config radius add
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the RADIUS server communication settings:
DXS-3326GSR:4#config radius add 1 10.48.74.121 key dlink default
Command: config radius add 1 10.48.74.121 key dlink default
Success.
DXS-3326GSR:4#
config radius delete
Purpose Used to delete a previously entered RADIUS server configuration.
Syntax
config radius delete <server_index 1-3>
Parameters
<server_index 1-3> − A number identifying the current set of
RADIUS server settings the user wishes to delete. Up to 3 groups
of RADIUS server settings can be entered on the Switch.
Restrictions Only administrator-level users can issue this command.
Description
The config radius delete command is used to delete a previously
entered RADIUS server configuration.
Example usage:
To delete previously configured RADIUS server communication settings:
DXS-3326GSR:4#
DXS-3326GSR:4#config radius delete 1
Command: config radius delete 1
Success.
218
To Next Page
Loading...
