D-Link Nuclias DNH-100

Nuclias Connect Software User Manual Nuclias Connect Conguration
Page 42
The SSID page displays the congurable parameters of a network’s wireless settings. Navigate to Conguration > Prole
Settings > [Site] > [Network] > Access Point > SSID to view existing settings. If the device type of the prole chosen is an
Access Point, the following options are displayed: SSID, VLAN, Bandwidth Optimization, RF Optimization, Schedule, Device
Settings, Performance, WLAN Partition, and Wireless Resource.
In the Security section, the following parameters can be congured:
Wireless Settings Description
Band Click the drop-down menu to select wireless frequency band.
Index Click the drop-down menu to select SSID index (Parameters: Primary,
SSID 1 to SSID 7). To create a new SSID, select the index parameter rst.
SSID Enter the wireless network name. The SSID must be the same across
all frequencies. In addition, make sure the network name (SSID) on
the selected access point is the same as the dened network name
(SSID) on the Nuclias Connect. For further information, see the access
point Basic > Wireless settings and Advanced Settings > DHCP Server
> Dynamic Pool Settings, to ensure the Domain Name eld reects the
dened network name (SSID) on the Nuclias Connect.
SSID Broadcast Click the drop-down menu to enable or disable the wireless SSID
visibility.
Security Click the drop-down menu to select the wireless security protocol:
Open System (no pre-shared key required), WPA-Personal, WPA
Enterprise (Radius server required), WPA2-Personal, WPA2-Enterprise
(Radius server required), WPA-Auto-Personal, WPA-Auto-Enterprise
(Radius server required).
WMM (Wi-Fi
Multimedia)
Click the drop-down menu to enable or disable the Wi-Fi multimedia.
Fast Roaming Click the drop-down menu to enable or disable fast roaming. This
function is only available for compatible models and specic software
version.
Security Settings Description
Encryption Click the drop-down menu to enable or disable WEP Open System
encryption. The function is only available when Security is set as
Open System.
Key Size Click the drop-down menu to select the WEP key size.
Key Type Click the drop-down menu to select the WEP key type.
Key Value Enter the open system WEP encryption key.
Conguration Prole Settings
SSID
Nuclias Access Point