D-Link Nuclias DNH-100

Nuclias Connect Software User Manual Nuclias Connect Conguration
Page 43
Conguration Prole Settings
SSID
ACL Settings Description
Action Click the drop-down menu to select the action that will applied to
the clients.
MAC Address Enter the MAC address of the clients that will be allowed or denied
access and click Add.
Upload MAC Address
List
Click Browser... to select the MAC address le, located on the local
computer, that will be uploaded. Click Upload to update the MAC
address list. Click Download to download the current MAC address
list.
IP Filter Settings Description
Action Click on the drop-down menu to enable or disable the IP lter
function.
IP Address Enter the IP address.
Subnet Mask Enter the subnet mask.
In the User Authentication section, the following parameters can be congured:
Field Description
Authentication Type Click the drop-down menu to select the authentication type applied
to the wireless client. (Web redirection only, User name/Password,
Remote Radius, LDAP, POP3, Passcode, External Captive Portal, MAC
address, Click through and Social Login)
Idle Timeout (2~1440) Enter the session timeout value.
Enable White List Check the box to enable the white list function. This function is only
available when Authentication Type is Username/Password.
MAC Address Enter the MAC address of the network device that will whitelisted and
click Add to add the address to the white list table. This function is
only available when Authentication Type is Username/Password.
Upload Whitelist File Click Browser... to select the white list le, located on the local
computer, that will be uploaded. Click Upload to update the white
list. Click Download to download the current white list. The function
is only available when Authentication Type is Username/Password.
IPIF Status Click the drop-down menu to enable or disable the use of the IP
interface.
VLAN Group Enter the VLAN group name.
Get IP Address From Click the drop-down menu to select the IP address conguration
setting.
IP Address Enter the IP address of the IP interface.
Subnet Mask Enter the subnet mask of the IP interface.
Gateway Enter the gateway of the IP interface.
DNS Enter the preferred DNS address of the IP interface.
Username Enter the username. The function is only available when
Authentication Type is set as Username/Password.
Password Enter the password and click Add. Click Clear to clear the entered
elds. This function is only available when Authentication Type is
Username/Password.
Nuclias
In the Access Control section, the following parameters can be congured:
Access Point