D-Link Nuclias DNH-100

Nuclias Connect Software User Manual Nuclias Connect Conguration
Page 65
Quality of Service
The QoS feature can prioritize certain types of data with the use of dierentiated services model. The priorities are marked in
each packet using Dierentiated Services Code Point (DSCP) for trac classication. To set the DSCP to CoS (Class of Service)
queue, choose a value from the drop-down menu and set a name for it.
Note: One DSCP value can only be mapped to one CoS queue value.
LBD Conguration
The Loopback Detection (LBD) feature can detect loops occurring on one or across dierent ports. In the LBD eld, click En-
abled to turn on the feature. It is disabled by default.
DDP Conguration
The D-Link Discovery Protocol (DDP) is a communication protocol dened by D-Link. When enabled, your device will become
discoverable and can be managed by the DNC server. Features from DNA (D-Link Network Assistant) like IP settings, rmware
upgrade, reboot and reset function will also be supported.
In the DDP eld, click Enabled to turn on, or Disabled to turn o this feature. It is enabled by default.
Local Credential Conguration
The username and password of your device is listed here.