D-Link Nuclias DNH-100

Nuclias Connect Software User Manual Nuclias Connect Conguration
Page 64
When Voice VLAN is enabled, a default Voice VLAN OUI list is displayed in the summary list below. These entries cannot be
edited nor deleted.
IGMP Snooping Conguration
IGMP snooping allows switches to be aware of multicasting groups and forward network trac accordingly. In this section,
users can enable or disable the IGMP Snooping function. When enabled, enter the VLAN ID of the VLAN. The max number of
VLANs is 256.
STP Conguration
RSTP (Rapid Spanning Tree Protocol) can ensure a loop-free topology and speedy convergence time. In this section, users can
enable or disable RSTP on all switches in the network.
DHCP Server Screen Conguration
DHCP (Dynamic Host Conguration Protocol) server screening provides a higher security by ltering illegal DHCP server pack-
ets. Select Enabled to turn on DHCP Server Screening. When Enabled is selected, enter the Allowed DHCP Server IP in the
eld.
Jumbo Frame Conguration
Jumbo frames are Ethernet frames with massive payload. They are used to reduce frame overload, increase system throughput
and reduce CPU utilization. In the Jumbo Frame eld, select Enabled or Disabled.