D-Link Nuclias DNH-100

Nuclias Connect Software User Manual Nuclias Connect Conguration
Page 90
System Settings Connection
The Connection tab displays device access address, port, and SSL certicate settings.
Navigate to System > Settings and click the Connection tab to display the relevant information.
In the Connection Setting section, the following parameters can be congured:
Parameter Description
Device Access Address Enter the Nuclias Connect Server application’s IP address.
To manage remote APs, the IP address must be a public
IP address; IP mapping is required for instances behind a
rewall or router.
Device Access Port Enter the Nuclias Connect server application’s listen
port number. The default value is 8443. For remote AP
management behind a rewall or router, the inbound port
must be opened.
Web Access Port The web access ports as dened during the installation.
The values are predened.
Click Save to save the values and update the screen.
In the Update SSL Certicate section, the following parameters can be congured:
Parameter Description
Upload Certicate From
File
Click Browser... to select the SSL certicate le located
on the local drive that will be uploaded.
Upload Key From File Click Browser... to select the SSL key le located on the
local drive, that will be uploaded.
Click Save to save the values and update the screen.
Nuclias