Why is my Da-Lite Projector Accessories screen making noise?
There are several reasons why your Da-Lite Projector Accessories screen might be making noise: * Squeaking: The rubber end plug might be rubbing on the motor. Adjust the roller to center it in the case. * Grinding: A foreign object might be rubbing on the roller or fabric. Remove the object. * Gear noise: The motor assembly may need to be replaced.
Why does my Da-Lite Cosmopolitan Electrol Projection Screen keep coasting?
If your Da-Lite Projection Screen is coasting, it's likely due to a defective brake. The solution is to replace the motor assembly.
What to do if my Da-Lite Cosmopolitan Electrol Projection Screen roller displaced from mounting bracket?
If the roller of your Da-Lite Projection Screen has become displaced from the mounting bracket, it may be because the pin end slipped out of the nylon bearing. Try to realign the pin end bracket.
Why is my Da-Lite Projection Screen making noise?
If your Da-Lite Projection Screen is making excessive noise, it may be due to gear noise. The suggested solution is to replace the motor assembly. Note that the screen will operate with a low pitched hum.
What to do if my Da-Lite Cosmopolitan Electrol roller is displaced from the mounting bracket?
If the roller of your Da-Lite Projection Screen has become displaced from the mounting bracket, it might be that the pin end slipped out of the nylon bearing. To fix this, realign the pin end bracket.
General| Brand | Da-Lite |
|---|---|
| Model | Cosmopolitan Electrol |
| Category | Projection Screen |
| Language | English |
To Next Page