GEAR CONTROL
3
Driving - 163
Parking the vehicle
On vehicles equipped with lever
1
,
P position is automatically engaged
along with the electronic parking brake
(if the vehicle is equipped), when:
– the engine is stopped;
– the driver's seatbelt is unfastened
and the vehicle is stopped;
– the driver's door is opened and the
vehicle is stopped.
P is displayed on the instrument panel
and the P button lights up
As P position is automatically en
gaged when the engine is stopped,
you may have to engage N position in
some situations, for example in some
car washes:
– withtheenginerunning,pressbut
ton P, shift the selector lever
1
a notch
forwards or backwards then switch off
the engine;
– with the engine off and the ignition
on, move the selector lever
1
a notch
forwards or backwards then switch-off
the engine.
The next time the engine is restarted,
P position is engaged automatically
accordingtothecasesdescribedearli
er.
The P position must only be
engaged when the vehicle
is stationary.
Whenfacinguphill,tore
main stopped, do not keep
yourfootontheaccelera
tor.
Risk of overheating the auto
matic gearbox.
For safety reasons, do
not switch off the ignition
before the vehicle has
come to a complete
standstill.
Maintenance period
Refer to the maintenance document
for your vehicle or consult an approved
Dealer to check whether the automatic
gearboxrequiresscheduledmainte
nance.
If it does not need to be serviced, there
is no need to top up the oil.
Operating faults
– When driving, if the "WARNING:
Check Gearbox" message appears on
the instrument panel, it indicates a
fault.
Contact your approved Dealer as soon
as possible;
– When driving, if the "WARNING:
GearboxOverheating"messageap
pears on the instrument panel, stop as
soon as possible to let the gearbox
cool down and wait for the message to
disappear;
In the event of engine failure or an
electrical fault (battery fault) affecting
operation of the automatic gearbox,
ensurethatthevehicleisproperlyim
mobilised.