SEAT BELTS
2
60 - Getting to know your vehicle
The seat belt must be worn as close to
thebodyaspossible.e.g.avoidwear
ingheavyclothing,keepingbulkyob
jects under the belts, etc.
Locking
Unwind the belt slowly and smoothly
and ensure that the buckle
3
locks into
the catch
5
(check that it is locked by
pulling on the buckle
3
).
Ifthebeltjams,allowittoreturnslight
ly before attempting to unwind it again.
If your seat belt is completely jammed,
pull slowly, but firmly, so that just over
3 cm unwinds. Allow it to return slightly
before attempting to unwind it again.
If there is still a problem, contact an
approved dealer.
Unlocking
Press the button
4
and the seat belt
will be rewound by the inertia reel.
Guide the belt.
Seat belt reminder warning
lights
Thiswarninglightappearsonthecen
tral display
A
when the ignition is
switchedonandifthedriver’sand/or
front passenger and/or rear passenger
seat belt(s) (if the seat is occupied) is
not fastened.
Front and rear seat belt reminder
warning
With the doors closed, the graphic
6
is
displayed on the instrument panel for
approximately 60 seconds when the
vehicleignitionisswitchedon.Thisin
forms the driver of the fastening status
of each of the seat belts every time:
– the doors are opened during driving
(vehicle speed above zero);
– a seat belt is fastened/unfastened.
Understanding the graphic
6
:
seat belt fastened;
–
seat occupied and seat belt
unfastened;
–