User’s Manual
68
After you have configured the general settings, on the General interface, click Next.
Date and time
Configure the settings for date and time parameters.
Table 5-3 Date and time parameters
System Time
In the
box, enter time for the system.
Click the time zone list, you can select a time zone for the system, and the
time in adjust automatically.
Do not change the system time randomly; otherwise the recorded video
cannot be searched. It is recommended to avoid the recoding period or stop
recording first before you change the system time.
Time Zone In the
list, select a time zone for the system.
Date Format In the
list, select a date format for the system.
Date Separator In the
list, select a separator style for the date.
Time Format
In the
list, select
or
for the time display
style.
DST Enable the Daylight Saving Time function. Click
or click
.
Start Time
Configure the start time and end time for the DST.
End Time
NTP
Enable the NTP function to sync the Device time with the NTP server.
If NTP is enabled, device time will be automatically synchronized with
server.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
