Dahua Technology VTH2421FW-P User Manual

Parameter Description
Device Info
Channel
●
If IPC is connected, default setting is 1.
●
If NVR is connected, set channel number of IPC on NVR.
Device Name Name of the IPC/NVR.
Stream Type
●
Main stream: High denition that needs large amount of
bandwidth. Applicable to local storage.
●
Extra stream: Relatively smooth image that needs small
amount of bandwidth. Applicable to network with
insucient bandwidth.
Protocol
It includes local protocol and ONVIF protocol. Please select
according to the protocol of the connected device.
Encryption Enable it if the IPC to be added is encrypted.
Network Cong
IP IP address of the IPC/NVR.
Username The login username of the webpage of the IPC/NVR.
Password The login password of the webpage of the IPC/NVR.
Port 554 by default.
Favorites Add the IPC to Favorites.
Step 4 Tap .
Related Operations
: Add the IPC to Favorites.
3.5.2.2 Modifying IPC
Procedure
Step 1 Select Monitor > .
Step 2 Tap of the IPC, and then tap at the right upper corner.
Step 3 Modify IPC parameters.
For details, see Table 3-4 .
Step 4 Tap .
3.5.2.3 Deleting IPC
Delete the IPC that has been added. However, IPC synchronized from VTO or the platform cannot
be deleted.
Procedure
Step 1 Select Monitor > .
Step 2 Delete the IPC.
52

Dahua Technology VTH2421FW-P Specifications

General

Brand	Dahua Technology
Model	VTH2421FW-P
Category	Intercom System
Language	English