It is recommended to turn o SSH, and turn on security mode and password
protection. Otherwise, the device might be exposed to security risks and data leakage.
Step 6 Tap .
3.7.4 Conguring VTO
Background Information
Add VTOs and fence stations to bind them with the VTH.
Procedure
Step 1 On the main screen, select Setting > > Project Settings.
Step 2 Enter the password, and then tap OK.
Step 3 Tap .
Figure 3-51 VTO conguration
Step 4 Add a VTO or fence station.
●
Add a main VTO.
1. Tap next to the main VTO, and then enter the main VTO name, VTO IP address,
username and password.
2. Tap .
Username and Password must be consistent with the login username and
password of the VTO webpage.
3. Tap .
79
To Next Page
Loading...
