Need help?Do you have a question about the Dahua Technology DHI-VTH1550CH-S and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Touchscreen | Capacitive |
| Operation Method | Touchscreen |
| Video Compression | H.264 |
| Audio Input | Built-in Microphone |
| Audio Output | Built-in Speaker |
| Network Protocol | TCP/IP |
| Alarm Input | 6 |
| Alarm Output | 1 |
| Material | Plastic |
| Operating Temperature | -10°C to +55°C |
| Weight | 0.8 kg |
| Display Size | 7 inch |
| Resolution | 800 x 480 |
| Audio | Yes |
| Ethernet | 10/100 Mbps |
| Power Supply | DC 12V |
| Power Consumption | ≤10W |
| Mounting Type | Surface |
| Operating Humidity | 10% - 90% RH |
| Network Interface | 10M/100Mbps Ethernet |
Requirements for professionals installing and maintaining the device.
Guidelines and safety measures for using the device's power supply.
Essential steps for system security, including password changes and firmware updates.
Guidelines for securing network access and communication.
Further configurations to enhance system security and protect hardware.
Description of the front panel keys and functionalities for specific VTH models.
Description of the front panel keys and functionalities for specific VTH models.
Steps for planning the installation process before physical setup.
Procedure for checking the device and its package for completeness and damage.
Instructions for physically mounting and installing the VTH unit on a wall.
Detailed steps for surface mounting the VTH device using a bracket.
Checks and preparations required before configuring the VTH unit.
Process of initializing and setting up the VTH device parameters.
Guide to the initial setup process, including password and email entry.
Steps to configure the network settings for the VTH device.
How to set VTH room number, type, and Master IP address.
Steps to configure the SIP server settings for VTH and build connections.
Procedure for adding VTO stations for two-way communication and door control.
How to test and verify the VTH unit's functionality after configuration.
Guide to making a test call from a VTO to verify VTH operation.
How to monitor video feeds from a VTO station.
Description of the main menu icons and their corresponding functions.
Guide to configuring various VTH functions and settings.
How to set custom ring tones for incoming calls and alerts.
How to configure the Do Not Disturb function to silence calls during specific times.
How to configure alarm types, statuses, and actions for incoming alarms.
Setting up parameters for wired alarm zones, including type and status.
Setting up parameters for wireless alarm zones.
Configuring the alarm output function to trigger external devices.
Setting operational modes and forwarding incoming calls.
Configuring system time, time zone, daylight saving, display, and password.
How to set the VTH system time, time zone, and DST.
Adjusting screen brightness, screensaver, and touchscreen cleaning.
How to set or change the login password for the VTH device.
Procedure for resetting the password and viewing product information.
How to make, receive, manage calls, and add contacts.
Procedure for adding, editing, and deleting contacts for calls.
How to make calls to other VTH units within the same or different units.
How to answer incoming calls from other VTH units.
Viewing and managing missed, accepted, and all call logs.
Steps to view live video from a main VTO station or sub-station.
How to display video from IP cameras connected to the intercom system.
Procedure for adding IP cameras to the intercom system for monitoring.
How to modify the parameters for connected IP cameras.
Steps to remove an IP camera or recording device from the list.
How to view video from a connected IP camera or recording device.
How to add and manage favorite VTO stations and IP cameras for quick access.
How to view system information, including security alarms.
How to view and manage security alarm messages and records.
How to retrieve and view guest messages recorded at the VTO station.
How to view videos and snapshots stored on the SD card.
How to arm and disarm the security system.
Steps to arm the security system, including password entry.
Steps to disarm the security system, including password entry and anti-hijacking.
Instructions for downloading the DSS Mobile app from the VTH QR code or app stores.
Steps to register the DSS Mobile app with the VTH or DSS server.
How to configure call forwarding and operations for the mobile app.
Setting up call forwarding from the VTH to the mobile device.
How to answer calls and unlock doors via the mobile application.
How to view VTO video feeds using the DSS Mobile application.
Viewing and managing call records within the DSS Mobile application.
Configuring event subscription, sound, and viewing version info.
How to view access and alarm messages on the mobile application.
To Next Page
