Dahua Technology VTH2421FW-P - Factory Settings or Reset

Figure 3-56 SIP server (2)
Step 4 Congure the parameters.
Table 3-13 Description of SIP server parameters
Parameter
Description
Server IP
●
When a platform works as the SIP server, it is the IP address of the
platform.
●
When a VTO works as the SIP server, it is the IP address of the VTO.
Network Port
●
5080 when a platform works as the SIP server.
●
5060 when a VTO works as the SIP server.
Username
Keep it default, or turn on Custom Name, and then you can edit the
username.
Registration Password Keep it default.
Domain
When a VTO works as the SIP server, it must be VDP; otherwise, it can be
null.
Username
SIP server login username and password.
Login Password
Step 5 Tap next to Enable Settings to enable the SIP server function.
Step 6 Tap .
83