119
3.14.1.5 Remote
3.14.1.5.1 Device Status
From main menu->Setting->Remote->Status, here you can view the IPC status of the corresponding
channel such as motion detect, video loss, tampering, alarm and etc. See Figure 3-129.
IPC status: : Front-end does not support. : Front-end supports. : There is alarm
event from current front-end.
Connection status: : Connection succeeded. : Connection failed.
Refresh: Click it to get latest front-end channel status.
Figure 3-129
3.14.1.5.2 Firmware
From main menu->Setting->Remote->Firmware, it is to view channel, IP address, manufacturer, type,
system version, SN, video input, audio input, external alarm and etc. See Figure 3-130.
To Next Page
Loading...
