166
Please make sure the network camera supports this function.
From main window->Setup->Event->Video detect->Video diagnosis, the video diagnosis interface is
shown as in Figure 4-57.
Figure 4-57
Click Set button, the interface is shown as below. See Figure 4-58.
System can generate an alarm once there is stripe, noise, or video is color cast, out of focus or over
exposure.
Figure 4-58
For detailed setups, please refer to chapter 4.8.3.1.1 motion detect for detailed information.
4.8.3.2 Face Detect
When camera detects human face, system can generate an alarm.
To Next Page
Loading...
