Dahua 6064 SERIES

9
2 Front Panel and Rear Panel
2.1 Front Panel
2.1.1 NVR 6000/6064 Series
For the product of LCD, the front panel is shown as below. See Figure 2-1.
Figure 2-1
Please refer to the following sheet for front panel button information.
SN
Name
Function
1
Power button
Press it once to turn on the device.
Press it for a long time to turn off the device. (Usually we do not
recommend).
Press power button for a long time or pull out the power cable may
result in device auto restart.
2
System HDD
Indicator light
The blue light flashes when system is reading or writing the system
HDD.
In the system HDD, there are device important configuration file,
factory default configuration file, and device initial boot up data.
3
Alarm indicator
light
The alarm indicator light becomes on once an alarm occurred. It
becomes on via the software detection. The alarm includes local
alarm, no disk and etc.
4
Network
indicator light
The network indicator light is blue and it flashes when you connect the
device to the network.
5
USB port
/
6
Front panel lock
/
Another front panel, it is shown as in Figure 2-2.