Dahua 6064 SERIES User Manual

165
Figure 4-55
4.8.3.1.3 Tampering
From main window->Setup->Event->Video detect->Tampering, the tampering interface is shown as in
Figure 4-56.
After analysis video, system can generate a tampering alarm when the detected moving signal reached
the sensitivity you set here.
For detailed setups, please refer to chapter 4.8.3.1.1 motion detect for detailed information.
Figure 4-56
4.8.3.1.4 Video diagnosis
Important

Dahua 6064 SERIES Specifications

General

Brand	Dahua
Model	6064 SERIES
Category	Network Hardware
Language	English