204
Figure 4-121
4.11 Alarm
Click alarm function, you can see an interface is shown as Figure 4-122.
Here you can set device alarm type and alarm sound setup (Please make sure you have enabled audio
function of corresponding alarm events.).
Figure 4-122
Please refer to the following sheet for detailed information.
System alarms when video loss occurs.
System alarms when motion detection alarm
occurs.
System alarms when camera is viciously masking.
System alarms when disk is full.
System alarms when disk error occurs.
Alarm input device sends out alarm.
To Next Page
Loading...
Need help?
General
