Show filer: It is to filter the searched device.
None: it is to display all searched devices.
IPC: It is to display all cameras.
DVR: It is to display all storage devices such as NVR, DVR.
Change IP:
Click , you can change the information such as IP address, subnet mask, and
default gateway, user name, password of the checked device. See Figure 4-66.
Figure 4-66
You can check several devices at the same time and then click the edit
button .See Figure 4-3. Please check Batch modify button and then input
start IP, end IP and default gateway.
To Next Page
Loading...
