Please note the activation snapshot has the higher priority than schedule snapshot. If
you have enabled these two types at the same time, system can activate the activation
snapshot when alarm occurs, and otherwise system just operates the schedule
snapshot.
4.11.4.1.2.4 Image FTP
In the main menu, from Setting->Network->FTP, you can set FTP server information.
Please enable FTP function and then click save button. See Figure 4-150.
Please boot up corresponding FTP server.
Please enable schedule snapshot (Chapter 4.11.4.1.2.1) or activation snapshot
(Chapter 4.11.4.1.2.2) first, now system can upload the image file to the FTP server.
Figure 4-150
4.11.4.2 HDD Manager
Here is for you to view and implement hard disk management. See Figure 4-151.
You can see current HDD type, status, capacity and etc. The operation includes format
HDD, and change HDD property (read and write/read-only/redundancy).
Please input the
corresponding information
here, if you just upload the
image FTP.
To Next Page
Loading...
Need help?
General