The default value is 80. You can input the actual port number if
necessary.
The default value is 443. You can input the actual port number if
necessary.
The default value is 554.
5.8.2.3 WIFI
Please note this function is for the device of WIFI module.
The WIFI interface is shown as in Figure 5-30.
Figure 5-30
Please check the box to enable WIFI function and then click the Search SSID button. Now
you can view all the wireless network information in the following list. Double click a name
to connect to it. Click Refresh button, you can view latest connection status.
5.8.2.4 3G
5.8.2.4.1 CDMA/GPRS
The CDMA/GPRS interface is shown as in Figure 5-31.
Figure 5-31
Please refer to the following sheet for detailed information.
To Next Page
Loading...
