EasyManuals Logo

Dahua HCVR5104C Series User Manual

Dahua HCVR5104C Series
499 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #422 background imageLoading...
Page #422 background image
409
Tour
You need to check the box here to enable this function. System
begins 1-wiindow or multiple-window tour display among the
channel(s) you set to record when an alarm occurs.
PTZ
Activation
Here you can set PTZ movement when alarm occurs. Such as go
to preset X. See Figure 5-58.
Log
Check the box here, system can record motion detect event log.
5.8.3.1.2 Video Loss
The video loss interface is shown as in Figure 5-59.
After analysis video, system can generate a video loss alarm when the detected moving
signal reached the sensitivity you set here.
Please note video loss does not support anti-dither, sensitivity, region setup. For rest
setups, please refer to chapter 5.8.3.1.1 motion detect for detailed information.
Figure 5-59
5.8.3.1.3 Tampering
The tampering interface is shown as in Figure 5-60.
After analysis video, system can generate a tampering alarm when the detected moving
signal reached the sensitivity you set here.
For detailed setups, please refer to chapter 5.8.3.1.1 motion detect for detailed
information.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dahua HCVR5104C Series and is the answer not in the manual?

Dahua HCVR5104C Series Specifications

General IconGeneral
BrandDahua
ModelHCVR5104C Series
CategoryDVR
LanguageEnglish

Related product manuals