Please refer to the following sheet for detailed information.
There are four options: 1920×1080,1280× 1024(default),1280×
720,1024×768. Please note the system needs to reboot to activate
current setup.
Here is for you to adjust transparency. The value ranges from 128
to 255.
Check the box here, you can view system time and channel
number on the monitor video.
Check the box; you can optimize the margin of the preview video.
5.8.5.2.2 TV Adjust
Note
This function is for some series product only.
It is to set TV output region. See Figure 5-91.
Figure 5-91
5.8.5.2.3 Tour
The tour interface is shown as in Figure 5-92. Here you can set tour interval, split mode,
motion detect tour and alarm tour mode.
To Next Page
Loading...
Need help?
General