EasyManuals Logo

Dahua HDCVI series User Manual

Dahua HDCVI series
278 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #140 background imageLoading...
Page #140 background image
HDCVI Series DVR Users Manual
130
4.10.1.1.4 Remote Upgrade
It is to update the camera.
From main menu->setting->camera->remote, the interface is shown as below. See Figure 4-53.
Click Browse button and then select the upgrade file. Then select a channel (or you can select device
type filter to select several devices at the same time.)
Click Start upgrade button to update. You can see the corresponding dialogue once the upgrade is finish.
Figure 4-53
4.10.1.2 Camera
For analog channel, the camera interface is shown as in Figure 4-54. For digital channel, the
camera interface is shown as in Figure 4-55.
Channel: Select a channel from the dropdown list.
Saturation: It is to adjust monitor window saturation. The value ranges from 0 to 100. The default
value is 50. The larger the number, the strong the color is. This value has no effect on the general
brightness of the whole video. The video color may become too strong if the value is too high. For
the grey part of the video, the distortion may occur if the white balance is not accurate. Please note
the video may not be attractive if the value is too low. The recommended value ranges from 40 to 60.
Brightness: It is to adjust monitor window bright. The value ranges from 0 to 100. The default value
is 50. The larger the number is, the bright the video is. When you input the value here, the bright
section and the dark section of the video will be adjusted accordingly. You can use this function
when the whole video is too dark or too bright. Please note the video may become hazy if the value
is too high. The recommended value ranges from 40 to 60.
Contrast: It is to adjust monitor window contrast. The value ranges from 0 to 100. The default value
is 50. The larger the number is, the higher the contrast is. You can use this function when the whole
video bright is OK but the contrast is not proper. Please note the video may become hazy if the
value is too low. If this value is too high, the dark section may lack brightness while the bright
section may over exposure .The recommended value ranges from 40 to 60.

Table of Contents

Other manuals for Dahua HDCVI series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dahua HDCVI series and is the answer not in the manual?

Dahua HDCVI series Specifications

General IconGeneral
HDD InterfaceSATA
Video CompressionH.264/H.265
Network ProtocolsHTTP; HTTPS; TCP/IP; IPv4/IPv6; SNMP; UPnP; RTSP; UDP; SMTP; NTP; DHCP; DNS; DDNS; P2P
Remote AccessDMSS
Operating Temperature-10 °C to +55 °C (+14 °F to +131 °F)
Operating Humidity10% to 90% (non-condensing)

Related product manuals