EasyManuals Logo

Dahua HDCVI series User Manual

Dahua HDCVI series
278 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #184 background imageLoading...
Page #184 background image
HDCVI Series DVR Users Manual
174
The HDD detect function is to detect HDD current status so that you can clearly understand the HDD
performance and replace the malfunction HDD.
There are two detect types:
Quick detect is to detect via the universal system files. System can quickly complete the HDD scan.
If you want to use this function, please make sure the HDD is in use now. If the HDD is removed
from other device, please make sure the write-data once was full after it installed on current device.
Global detect adopts Windows mode to scan. It may take a long time and may affect the HDD that
is recording.
4.10.4.4.1 Manual Detect
The manual detect interface is shown as below. See Figure 4-114.
Please select detect type and HDD. Click start detect to begin. You can view the corresponding detect
information. See Figure 4-115.
Figure 4-114

Table of Contents

Other manuals for Dahua HDCVI series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dahua HDCVI series and is the answer not in the manual?

Dahua HDCVI series Specifications

General IconGeneral
HDD InterfaceSATA
Video CompressionH.264/H.265
Network ProtocolsHTTP; HTTPS; TCP/IP; IPv4/IPv6; SNMP; UPnP; RTSP; UDP; SMTP; NTP; DHCP; DNS; DDNS; P2P
Remote AccessDMSS
Operating Temperature-10 °C to +55 °C (+14 °F to +131 °F)
Operating Humidity10% to 90% (non-condensing)

Related product manuals