HDCVI Series DVR User’s Manual
Click add user button in Figure 4-131 , the interface is shown as in Figure 4-134.
Please input the user name, password, select the group it belongs to from the dropdown list.
Then you can check the corresponding rights for current user.
For convenient user management, usually we recommend the general user right is lower than the admin
account.
The modify user interface is similar to Figure 4-134.
Figure 4-134
When you create a new user, you can input the corresponding MAC address of current user. If you leave
this item in blank, any MAC address user can share this user account to login. Please note system
needs to check the validity of MAC. Only the 12-digit 0-f format address can pass the validity verification.
System only saves small character even you input capitalized one. You can see the corresponding
prompt if there is any illegal input.
4.10.5.6 Auto Maintain
Here you can set auto-reboot time and auto-delete old files setup. You can set to delete the files for the
specified days. See Figure 4-135.
You can select proper setup from dropdown list.
After all the setups please click save button, system goes back to the previous menu.
To Next Page
Loading...
Need help?
General
