HDCVI Series DVR User’s Manual
Figure 5-70
5.8.5.2 Display
Display interface includes GUI, TV adjust, Tour and zero-channel encoding.
5.8.5.2.1 Display
Here you can set background color and transparency level. See Figure 5-71.
Figure 5-71
Please refer to the following sheet for detailed information.
There are four options:
1920×1080,1280×1024(default),1280×720,1024×768. Please note
the system needs to reboot to activate current setup.
Here is for you to adjust transparency. The value ranges from 128
to 255.
Check the box here, you can view system time and channel
number on the monitor video.
Check the box; you can optimize the margin of the preview video.
5.8.5.2.2 Tour
The tour interface is shown as in Figure 5-72. Here you can set tour interval, split mode, motion detect
tour and alarm tour mode.