HDCVI Series DVR User’s Manual
Figure 5-76
5.8.5.5 Account
Note:
For the character in the following user name or the user group name, system max supports 6-digits.
The space in the front or at the end of the string is null. The valid string includes: character, number,
and underline.
The user amount default setup is 64 and the group amount default setup is 20. The factory default
setup includes two levels: user and admin. You can set the corresponding group and then set the
rights for the respective user in the specified groups.
User management adopts group/user modes. The user name and the group name shall be unique.
One user shall be included in only one group.
5.8.5.5.1 User name
In this interface you can add/remove user and modify user name. See Figure 5-77.
Figure 5-77
Add user: It is to add a name to group and set the user rights. See Figure 5-78.
There are four default users: admin/888888/666666 and hidden user “default”. Except user 6666, other
users have administrator right. The user 666666 can only have the monitor rights,.
To Next Page
Loading...
