Dahua NVR100 series User Manual

359
Figure 4-222
Step 4 In Figure 4-222, click the Enable box to enable POS function and then input POS device name.
Note
 The POS device name shall be unique.
 POS device name max supports 63-digit.
Step 5 Click Setup button after the connection type, the interface is shown as in Figure 4-223.
Step 6 Set source IP (POS device IP address) and destination IP (NVR IP address).
Figure 4-223

Dahua NVR100 series Specifications

General

Brand	Dahua
Model	NVR100 series
Category	Network Hardware
Language	English