Advanced Settings 46
Set the domain name of the MST domain.
By default, the domain name of the MST domain is the bridge MAC
address of the device.
Set the MST domain version.
Table 4-16 MSTI mapping
Displays the multiple spanning tree instances, 7 instances totally.
Input the VLAN number. For example. VLAN 1.
Click Save. Step 3
4.1.6.3 MSTI Priorities
Set the MSTI priorities. By default, it is 32768.
Select Advanced > Configuration > Spanning Tree > MSIT Priorities. The MSTI Priorities
interface is displayed. See Figure 4-63.
MSTI configuration Figure 4-63
4.1.6.4 CIST Ports
Select Advanced > Configuration > Spanning Tree > CIST Ports. Step 1
The STP CIST Port Configuration interface is displayed. See Figure 4-64.
To Next Page
Loading...
